When floorspace is at a minimum take your plant game vertically with our ‘Wall Dot’ planter. Wall Dots are available in four colours; Black, White, Limited Edition Olive and Limited Edition Oyster.

Designed and made in Melbourne from powder-coated steel.

Each Wall Dot is available in 2 sizes; Junior and Senior.

Suitable for indoor and outdoor use.

Specifications | Junior
Height | 315mm
Diameter | 315mm
Material | Zinc primed powder-coated mild steel circular frame + zinc primed powder-coated vessel
Drainage hole | no

Specifications | Senior
Height | 400mm
Diameter | 400mm
Material | Zinc primed powder-coated mild steel circular frame + zinc primed powder-coated vessel
Drainage hole | no

Shipping
World-wide shipping available
Shipping is automatically calculated at checkout
Item will ship within 10 days

Assembly Instructions
Please take care when handling all pieces, as small bumps on the surface of the frame can be sharp and cause injury.

You will receive:
1 x Wall Dot
1 x 90 degree HEX screwdriver
2 x screws

You will need:
1 x pencil
1 x drill
1 x stud finder (for plaster walls)
1 x level

Suitable for installing on concrete/brick* or plaster walls.
For plaster walls, use stud finder to locate studs – important to ensure stability.

Using the level, mark the position of the screw holes on the wall. Pre-drill holes.

Holding up the Wall Dot, attach to the wall with screws provided using the 90 degree screwdriver provided.

Plant out planter bowl, or if hanging at eye level or above, sit the plants in their plastic nursery pots inside the planter bowl.

*Please note that concrete and brick will require additional wall fixtures.

Load – we do not recommend loading the Wall Dot Senior with more than 5kg of soil and plants or the Wall Dot Junior with more than 3kg of soil and plants.